Heat pumps · 4 min

What drives a pool heat pump's running cost

Cover use, ambient temperature, airflow and flow rate determine what a heat pump actually costs to run.

01

A heat pump moves heat, so conditions matter

Efficiency is expressed as a coefficient of performance: units of heat moved per unit of electricity. That ratio falls as air gets colder and rises as it warms, which is why running the pump during the day is materially cheaper than running it overnight.

Water temperature matters just as much. Holding 26 degrees is far less demanding than pushing to 30, and each extra degree costs progressively more.

02

Covers and airflow are not optional

An uncovered pool loses most of its heat to evaporation and night-time radiation. A cover is the highest-return purchase in a heated pool setup, and a solar blanket changes the economics more than a larger heat pump would.

The unit also needs clean air. A heat pump boxed in against a wall, under a deck or surrounded by planting recirculates its own cold air and loses efficiency quickly. In Tokai, that usually means keeping the unit clear of dense garden planting.

03

Flow and filtration hours

Heat pumps need a minimum flow rate to run safely and efficiently. A dirty filter, a partly closed valve or an undersized pump trips flow errors and shortens the unit's life.

Align the heat pump's running window with the filtration schedule and set the target a degree or two below your ideal. That combination usually does more for the bill than any change to the machine.

Tokai · TK-LEAD

Need this looked at properly?

Send the details and we will tell you what is involved, what it is likely to need and when we can attend. Urgent refrigeration failures: call directly.

Call WhatsAppEnquire